Products

Home » Products » Switching Power Supply » Single Output Power Supply » 200W High-Efficiency PFC Power Supply with Multi-Voltage Outputs (RSP-200 Series) – Telecom, Industrial, and Medical Applications

Product Category

Switching Power Supply

Single Output Power Supply

LRS Power Supply

Multi Output Power Supply

Din Rail Power Supply

LED Driver

Power Adapter

DC-DC Converter

Isolated DC-DC Converter

Non-isolated Boost Converter

Non-isolated Buck Converter

Non-isolated Boost-Buck Converter

Inverter

Pure Sine Wave Inverter

Modified Sine Wave Inverter

Home Transformer

EMI Filter

Share to:

200W High-Efficiency PFC Power Supply with Multi-Voltage Outputs (RSP-200 Series) – Telecom, Industrial, and Medical Applications

Model: RSP-200
Brand: SMUN

Product Description

Model Specification Table

Model	RSP-200-12	RSP-200-24	RSP-200-27.3	RSP-200-36	RSP-200-48
Output Voltage	12V	24V	27.3V	36V	48V
Rated Current	16.7A	8.5A	7.3A	5.5A	4.2A
Current Range	0–16.7A	0–8.5A	0–7.3A	0–5.2A	0–4.2A
Rated Power	200W	204W	200W	200W	201.6W
Ripple Noise	150mVp-p	150mVp-p	150mVp-p	220mVp-p	240mVp-p
Voltage Adj. Range	10–13.2V	20–26.4V	23.5–29.5V	32.4–39.6V	41–56V
Voltage Tolerance	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%

Input Parameters (Universal)

Parameter	Description
Input Voltage Range	88–264VAC or 124–370VDC
Input Frequency	47–63Hz
PFC Efficiency	PF > 0.95 (230VAC) / PF > 0.98 (115VAC full load)
Input Efficiency	88–90% (varies by model)
Input Current (Typical)	4A/115VAC, 2A/230VAC
Surge Current	20A/115VAC, 40A/230VAC
Leakage Current	<1.5mA/240VAC

Protection Functions

Protection Type	Trigger Condition	Response Action
Overload Protection	115–135% of rated output power	Hiccup mode, auto-recovery after fault cleared
Overvoltage Protection	Output voltage exceeds threshold (model-dependent)	Output shutdown, auto-recovery after fault cleared
Overtemperature Protection	Excessive temperature	Output shutdown, auto-recovery when cooled down

Environmental Requirements

Parameter	Requirement
Operating Temperature	-30°C to +70°C (refer to derating curve)
Operating Humidity	20–90% RH (non-condensing)
Storage Conditions	-40°C to +85°C, 10–95% RH
Temperature Coefficient	±0.03%/°C (0–50°C)
Vibration	10–500Hz, 2G (XYZ axes, 10 min/cycle × 60 cycles)

Safety & Certification

Item	Standard/Requirement
Safety Standards	GB 4943.1, EN 60950.1 APPROVED
Insulation Resistance	I/P-O/P: 100MΩ @ 500VDC/25°C/70%RH
Withstand Voltage	I/P-O/P: 3kVAC, I/P-FG: 2kVAC, O/P-FG: 0.5kVAC
EMC - Emission: EN55032 (CISPR32) Class B

Immunity: EN62368-4 series + EN55035 |

Additional Information

Parameter	Description
MTBF (25°C)	≥206.5K hours (MIL-HDBK-217F standard)
Dimensions	215×115×30mm (L×W×H)
Packaging Weight	Single unit: 0.72kg; 30 units/box: 22.5kg, Volume: 0.78 cubic feet

Notes

All unspecified parameters are measured at 230VAC input, full load, 25°C unless noted.
Ripple noise measurements use a bandwidth of 20MHz with 12-inch twisted-pair wires and parallel 0.1μF + 47μF capacitors.
Low-input voltage operation requires derating (refer to derating curves).
EMC testing uses a 1mm-thick steel plate (360×360mm).

Key Differences from RSP-320 Series

Power Rating: 200W vs. 320W.
Output Voltages: Includes 27.3V (common in telecom/dc systems).
Efficiency: Slightly lower (up to 90%) compared to the 320W series.
Cooling: Free air convection vs. forced air cooling in the 320W series.
Package Weight: Lighter (0.72kg vs. 0.9kg for 320W).

Datasheet

{"json":"[{\"photoId\":\"401000854\",\"photoType\":\"pdf\",\"photoSize\":\"554\",\"name\":\"RSP-200 SPEC.pdf\",\"fileId\":\"12012664\",\"encodeFileId\":\"fyKUghALClQt\",\"photoUrlNormal\":\"//rjrorwxhikmrlm5p-static.micyjz.com/static/assets/widget/images/downloadNew/pdf.svg\"}]","type":"1"}