​How to install DR-Din rail power supply products？

The installation of the DR-Din rail power supply is quick and convenient. You only need to fix the DIN rail with screws on the wall, the inner wall of the electric control cabinet, or any installation plane in advance. Align the card slot with the DIN rail bar and click it lightly. It only takes one second, which is simple and fast. If electrical components need to be removed for maintenance or replacement, there is usually a corresponding mechanism to facilitate the quick removal of the operator. DR-Din rail power supply type standard power supply products, only need to press the plastic clip slider on the top of the back of the power supply, and the power supply can be easily removed from the rail. Now let us introduce how to install a DR-Din rail power supply.

Here is the content list:

Installation and removal

Separate the slider and the main body of the power supply

Fixed switching power supply

Installation and removal

For DR-Din rail power supply products, most of the rear mounting parts are composed of metal brackets on both sides and plastic clip sliders. You can align the mounting part on the back of the power supply with the DIN rail and complete the installation with just one click. When removing the power supply, you only need to press the plastic clip slider on the top of the back of the power supply, and the disassembly can be easily completed without brute force. For a few DR-Din rail power supplies without back strips, you need to use a small screwdriver to gently pry the protruding part on the back of the power supply downwards, and at the same time lift the power supply upwards to separate the power supply from the rails.

Separate the slider and the main body of the power supply

DR-Din rail power supply products are equipped with DIN rail mounting components. If you replace other types of mounting brackets, you need to remove the original DIN rail mounting components. The specific steps are as follows: Use a T10 screwdriver to remove the four screws. Thereby remove the two aluminum alloy brackets on both sides, then use a small flat-head screwdriver to move the plastic lock on the plastic clip slider down, and at the same time push the plastic clip slider up, so that the plastic clip slider and the main part of the power supply separate.

Fixed switching power supply

Remove the switching power supply from the package and place it at the second open point. After determining the position of the second switching power supply, pull the first switching power supply off. To start fixing, use a screwdriver to fix it from the back. A total of three places are fixed, and finally, the switching power supply is restored to its original position.

Zhejiang Ximeng Electronic Technology Co., Ltd. is a high-tech enterprise specializing in design, research and development, production, and sales. The company's professional team has extensive experience in handling OEM/ODM power supply and sensor products.