Description:
LRS-35 series is a 35W single-output enclosed type power supply with 30mm of low profile design.Adopting the full range 85-264VAC input,the entire series provides an output voltage line of 5V,12V,15V,24V,36V and 48V.
In addition to the high efficiency up to 89%,the design of metallic mesh case enhances the heat dissipation of LRS-35 that the whole series operates from -30℃ through 70℃ under air convection without a fan.
Delivering an extremely low no load power consumption(less than 0.2W),it allows the end system to easily meet the worldwide energy requirement.LRS-35 has the complete protection functions and 5G anti-vibration capability;it is complied with the international safety regulations such as TUV EN62368-1,EN60335-1,EN61558-1/-2-16,UL62368-1 and GB4943.LRS-35 series serves as a high price-to-performance power supply solution for various industrial applications.
Applications:
Industrial automation machine
Industrial control system
Mechanical and electrical equipment
Electronic instruments,equipments or apparatus
Household appliances
LED lighting and display
Small control devices, sensors, and communication equipment
Features:
Universal AC input/Full range
Built-in Emi filter,tiny ripple
Protections:short circuit/overload/over voltage
Cooling by free air convection
43,000 hours of continuous operation at 20℃
100% full load burn-in test
LED indicator for power on
Compliance to IEC/EN60335-1(PD3) and IEC/EN61558-1,2-16 suitable for home appliance
3 years warranty
Model | LRS-35-12 | LRS-35-15 | LRS-35-24 | LRS-35-36 | LRS-35-48 | |
Output | DC Voltage | 12V | 15V | 24V | 36V | 48V |
Current Range | 0-3A | 0-2.4A | 0-1.5A | 0-1A | 0-0.8A | |
Rated Power | 36W | 36W | 36W | 36W | 38.4W | |
Ripple Noise(Max) | 120mVp-p | 120mVp-p | 150mVp-p | 200mVp-p | 200mVp-p | |
Voltage Adj.Range | 10.8~13.2V | 13.5~16.5V | 21.6~26.4V | 32.4~39.6V | 43.2~52.8V | |
Voltage Tolerance | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
Line Regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
Load Regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
Set up,Rise time | 1000ms,30ms/230VAC 2000ms,30ms/115VAC(full load) | |||||
Hold up Time | 30ms/230VAC 12ms/115VAC(full load) | |||||
Input | Voltage Range | 85 ~264VAC 120~373VDC | ||||
Frequency | 47 ~ 63Hz | |||||
Efficiency | 86% | 86% | 88% | 88% | 89% | |
AC Current | 0.7A/115VAC 0.42A/230VAC | |||||
Inrush Curent | COLD START: 45A/230VAC | |||||
Leakage Current | <0.75mA / 240VAC | |||||
Protection | Overload | 110 ~ 150% rated output power | ||||
Protection tye:Hiccup mode,recovers automatically after fault condition is removed | ||||||
Over Voltage | 13.8~16.2V | 18.8~21.8V | 27.6~32.4V | 41.4~48.6V | 55.2~64.8V | |
Protection type : Shut off o/p voltage, re-power on to recover | ||||||
Environment | Working Temperature | -10 ~ +70℃ (Refer to derating curve as datasheet from SMUN) | ||||
Working Humidity | 20 ~ 90% RH non-condensing | |||||
Storage Temp.Humidity | -45 ~ +85℃, 20 ~ 95% RH non-condensing | |||||
Temp.Coefficient | ±0.03%/℃ (0 ~ 50℃) | |||||
Vibration | 10~500Hz,2G 10 min/1 cycle,60min.each X Y Z axes | |||||
Safety | Safety Standards | GB4943.1,EN60950.1 Approved | ||||
Withstand Voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/25℃/70% RH | |||||
EMC Emission | EN61000-3-2:2014/EN61000-3-3:2013 | |||||
EMC Immunity | EN 55032:2015/EN55035:2017/60950-1 | |||||
Others | MTBF | ≥720.6K hrs MIL-HDBK-217F(25℃) | ||||
Dimension | 99*98*30mm (L*W*H) | |||||
Packing | 0.23Kg; 60pcs/14.8Kg/43*23*33mm/CTN | |||||
Note | 1.All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25℃ of ambient temperature. 2.Ripple noise are measured at 20MHz of bandwidth by using a 12"twisted pair-wire terminated with a 0.1uf and 47uf parallel capacitors. 3.Tolerance includes set up tolerance,line regulation and load regulation. 4.Derating output is required under low input voltage.Please refer to derating curve for details. 5.The power supply should be considered as a part of the components in the system.All EMC tests will test samples on a metal iron plate with a thickness of 1mm,a length of 360mm and width of 36mm. 6.Please contact with SMUN customer service for more details. |
Home About Us Power Supply Service&Support Solution Blogs Contact Us Privacy Policy