​S-Single Output Power Supply (S-800 800W 110V/220V, for marking machine) information introduction

There are many types of S-Single Output Power Supply produced by our company, and each of our S-Single Output Power Supply with a specific purpose has different parameters. Because the product parameters are complex and space is limited, this article focuses on the input parameters, output parameters, and protection parameters of S-Single Output Power Supply such as S-800 800W 110V/220V Input Power Supply For Marking Machine.

Here is the content list:

The output parameters of this S-Single Output Power Supply

The input parameters of this S-Single Output Power Supply

The protection parameters of this S-Single Output Power Supply

The output parameters of this S-Single Output Power Supply

The S-Single Output Power Supply named "S-800 800W 110V/220V Input Power Supply For Marking Machine" has 4 models. The DC voltage of the S-Single Output Power Supply model S-800-12 is 12V. And its rated current is 67A, which means that the current range of this model of S-Single Output Power Supply is from 0A to 67A. Combining the above data, we can know that 804W is the rated power of the S-Single Output Power Supply model S-800-12.

Rated power 801W, 802W, and 802W correspond to S-Single Output Power Supply with type numbers S-800-15, S-800-24, and S-800-48 respectively. And the number after the last "-" of their model name represents their DC voltage. Divide the rated power by the DC voltage to get the rated current of this type of S-Single Output Power Supply.

When we talk about the maximum ripple noise of different models of this type of S-Single Output Power Supply, we can know by observation that the greater the DC voltage of the S-Single Output Power Supply, the greater its maximum ripple noise. The ripple noise of S-800-12 and S-800-15 is 240mVp-p. The ripple noise of S-800-24 and S-800-48 is both 280mVp-p.

The input parameters of this S-Single Output Power Supply

To save your time, here only comes the input efficiency (Typ.) for reference. The efficiency (Typ.) of the DC voltage of S-Single Output Power Supply is higher. For this kind of S-800 800W 110V/220V Input Power Supply For Marking Machine, if the DC voltage reaches 15V or 24, it has an efficiency (Typ.) of up to 84%. Even the lowest DC voltage model of this type of S-Single Output Power Supply has an efficiency (Typ.) of 82%. 86% is the highest efficiency, and the S-Single Output Power Supply with the type number S-800-48 can do it.

The protection parameters of this S-Single Output Power Supply

When the system detects that certain indicators of S-Single Output Power Supply reach the pre-set dangerous range, then the protection system will be activated. We are now introducing the S-800 800W 110V/220V Input Power Supply For Marking Machine. When its rated output power reaches the range of 115% to 135%, it is an overload situation. At this time, the hiccup mode will start to operate until the S-Single Output Power Supply returns to its normal state.

The overvoltage range of this S-Single Output Power Supply will vary depending on the model. 13.8V~16.2V, 18.8~21.8V, 27.6~32.4V, 55.2~64.8V, in turn, correspond to the S-Single Output Power Supply for marking machine with DC voltage of 12V, 15V, 24V, and 48V.

If you are interested in our products, please consult the official website: www.smunchina.com. Thank you very much for your support.