Basic parameters:
Output power: 150W, which can meet the use of equipment or scenarios with large power requirements.
Output voltage: For example, there are many specifications such as 48V available. The specific output voltage can be selected according to actual needs.
Output current: Generally within the range of 0 - 3A, which can adapt to the current requirements of different loads to a certain extent.
Input voltage: Supports wide voltage input of 110V/220V, which makes it can be used normally in different regions and voltage environments, and has good versatility.
Waterproof performance:
The waterproof level reaches IP67. This means that the power supply has a high waterproof ability and can be soaked underwater for a long time at a certain depth without damaging the internal circuit. It can adapt to harsh usage environments such as outdoors and humidity, such as outdoor lighting and landscape engineering scenarios.
Quality and certification:
It has passed certifications such as CE, ROHS, and ISO 9001. This indicates that the power supply meets relevant standards and requirements in terms of quality, environmental protection, and production management, and has high reliability and safety.
Other characteristics:
Size: The overall size is relatively small, generally 222 * 68 * 43mm, which is convenient for installation and use in different spaces.
Efficiency: The power supply efficiency is relatively high, usually reaching about 88%. This means that it can reduce energy loss during the energy conversion process, improve energy utilization efficiency, and reduce usage costs.
Protection function: It has multiple protection functions such as short circuit, overload, overvoltage, and overtemperature, which can effectively protect the connected equipment and the power supply itself and prevent damage due to abnormal conditions.
Customized service: Supports customized services such as custom logos and packaging to meet the personalized needs of different customers.
Model | SMV-150-12 | SMV-150-15 | SMV-150-24 | SMV-150-36 | SMV-150-48 | |
Output | DC voltage | 12V | 15V | 24V | 36V | 48V |
Rated current | 12.5A | 10A | 6.3A | 4.2A | 3.2A | |
Current range | 0-12.5A | 0-10.0 | 0-6.3A | 0-4.2A | 0-3.2A | |
Rated power | 150W | 150W | 150W | 150W | 150W | |
Ripple&noise | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | |
Voltage tolerance | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
Line regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
Load regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
Set up,rise time | 200ms,50ms,30ms | |||||
Hold up time(Typ.) | 30ms/230VAC | |||||
Input | Voltage range | 85~132/170~264VAC or 120~373VDC | ||||
Frequency | 47 ~ 63Hz | |||||
Efficiency | 85% | 86% | 86% | 87% | 88% | |
AC current | 1.0A/230V | |||||
Inrush current | Cold start: 60A/230V | |||||
Leakage current | <3.5mA/240VAC | |||||
Protection | Overload | Rated output power 105%~135% start overload protection | ||||
Protection type:hiccup mode,auto-recovery after fault condition is removed | ||||||
Over voltage | Rater output power 135%~150% start over voltage protection | |||||
Protection type:Shut down o/p voltage, re-power on to recover | ||||||
Over temperature | When temperature of transistor inner node is over 105℃,start over temperature protection | |||||
Protection type:Shut down o/p voltage, re-power on to recover | ||||||
Environment | Working temperature | -10℃~+60℃ | ||||
Working humidity | 20-90%RH | |||||
Storage temp,humidity | -20~+85℃,20%-90%RH | |||||
Temp.coefficient | ±0.03%℃(0-50℃) | |||||
Vibration | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes | |||||
Safety & EMC | Safety standards | Compliance to:CE and GB4943.1 safety standards | ||||
Withstand voltage | I/P-O/P:1.5KVAC 1minute I/P-FG:1.5KVAC 1minute O/P-PG:0.5KVAC 1minute | |||||
Isolation resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH | |||||
EMC emission | EN61000-3-2:2014/EN61000-3-3:2013 | |||||
EMC immunity | EN 55032:2015/EN55035:2017/60950-1 | |||||
Others | MTBF | ≥327.9K hrs MIL-HDBK-217F(25℃) | ||||
Size | L240*W69*H43mm | |||||
Packing | 1.25KG | |||||
Note | 1. All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25℃ of ambient temperature. 2. Ripple&noise are measured at 20MHz of bandwidth by using a 12 "twisted pair -wire terminated with a 0.1uf and 47uf parallel capacitors. 3. Tolerance:includes set up tolerance,line regulation and load regulation. 4. Derating output is required under low input voltage. Please refer to the derating curve for details. 5. The power supply should be considered as a part of the components in the system. All EMC tests will test the test samples on a metal iron plate with a thickness of 1mm, a length of 360mm * width of 360mm. | |||||
Home About Us Power Supply Service&Support Solution Blogs Contact Us Privacy Policy