SMV-30 Constant Voltage 30W 12V/15V/24V/36V/48V Power LED Driver

Description

 

SMV-30 is a 30W industrial AC/DC power supply featuring the outstanding to operate under high humid,dusty,oily,and high-vibration harsh environment.The entire series is housed with the aluminum case and fully potted with hear-conducted silicone.Thanks to state-of-the-art design,the working efficiency up to 85%,enabling SMV-30 perfectly work between -10℃ and +60℃ under free air convection.The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications.

 

Applications

 

Outdoor telecommunication equipment

Outdoor electronic signage and billboard

Petroleum plant or mine shaft facility

LED street lighting

LED high-bay lighting

Packing space lighting

LED fishing lamp

LED greenhouse lighting

 

Specifications

Model		SMV-30-12	SMV-30-15	SMV-30-24	SMV-30-36	SMV-30-48
Output	DC voltage	12V	15V	24V	36V	48V
	Rated current	2.5A	2A	1.25A	0.84A	0.63A
	Current range	0 ~ 2.5A	0-2.0A	0-1.25A	0-0.84A	0-0.63A
	Rated power	30W	30W	30W	30W	30W
	Ripple&noise	50mVp-p	50mVp-p	80mVp-p	100mVp-p	100mVp-p
	Voltage tolerance	±1.0%	±1.0%	±1.0％	±1.0%	±1.0%
	Line regulation	±0.5%	±0.5%	±0.5％	±0.5%	±0.5%
	Load regulation	±0.5%	±0.5%	±0.5％	±0.5%	±0.5%
	Set up,rise time	200ms,50ms,30ms
	Hold up time（Typ.)	30ms/230VAC
Input	Voltage range	85~264VAC or 120~373VDC
	Frequency	47 ~ 63Hz
	Efficiency	75%	80%	82%	82%	85%
	AC current	0.5A/230V
	Inrush current	Cold start: 45A/230V
	Leakage current	<0.5mA/240VAC
Protection	Overload	Rated output power 105%~135% start overload protection
		Protection type:hiccup mode,auto-recovery after fault condition is removed
	Over voltage	Rater output power 135%~150% start over voltage protection
		Protection type:Shut down o/p voltage, re-power on to recover
	Over temperature	When temperature of transistor inner node is over 105℃,start over temperature protection
		Protection type:Shut down o/p voltage, re-power on to recover
Environment	Working temperature	-10℃～+60℃
	Working humidity	20-90%RH
	Storage temp,humidity	-20~+85℃，20%-90%RH
	Temp.coefficient	±0.03%℃(0-50℃)
	Vibration	10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
Safety & EMC	Safety standards	Compliance to:CE and GB4943.1 safety standards
	Withstand voltage	I/P-O/P:1.5KVAC 1minute I/P-FG:1.5KVAC 1minute O/P-PG:0.5KVAC 1minute
	Isolation resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC emission	EN61000-3-2:2014/EN61000-3-3:2013
	EMC immunity	EN 55032:2015/EN55035:2017/60950-1
Others	MTBF	≥327.9K hrs MIL-HDBK-217F(25℃)
	Size	L222*W30*H20mm
	Packing	0.25KG
Note	1. All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25℃ of ambient temperature. 2. Ripple&noise are measured at 20MHz of bandwidth by using a 12 "twisted pair -wire terminated with a 0.1uf and 47uf parallel capacitors. 3. Tolerance:includes set up tolerance,line regulation and load regulation. 4. Derating output is required under low input voltage. Please refer to the derating curve for details. 5. The power supply should be considered as a part of the components in the system. All EMC tests will test the test samples on a metal iron plate with a thickness of 1mm, a length of 360mm * width of 360mm.

{"json":"[{\"downloadUrl\":\"//rjrorwxhikmrlm5p-static.micyjz.com/SMV-30+SPEC-aidlpBpjKlllmSRqkmliomoip.pdf?dp=1\",\"encodeFileId\":\"agUKfnAGOhpE\",\"fileId\":8064204,\"fileName\":\"SMV-30 SPEC.pdf\",\"fileType\":\"pdf\",\"photoUrlNormal\":\"//jlrorwxhikmrlm5p-static.micyjz.com/static/assets/widget/images/downloadNew/pdf.svg\",\"pname\":\"SMV-30 SPEC.pdf\",\"name\":\"SMV-30 SPEC.pdf\"}]","type":"1"}