Products

Home » Products » Switching Power Supply » Din Rail Power Supply » HDR-60 60W Din Rail Power Supply

Product Category

Non-isolated Boost-Buck Converter

HDR-60 60W Din Rail Power Supply

Model: HDR-60
Brand: SMUN

Product Description

Description:

HDR-60 is one economical ultra slim 60W DIN rail power supply series,adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails.The body is designed 52.5mm(3SU)in width,which allows space saving inside the cabinets.The entire series adopts the full range AC input from 85VAC to 264VAC(277VAC operational) and conformts to BS EN/EN61000-3-2,the norm the European Union regulates for harmonic current.

HDR-60 is designed with plastic housing that it can effectively prevent user from electric hazards.With working efficiency up to 91%,the entire series can operate at the ambient temperature between -30℃ and 70℃ under air convection.The complete protection functions and relevant certificates for home automations and industrial control apparatus(IEC 62368-1,UL508,UL62368-1,BS EN/EN61558-2-16)make HDR-60 a very competitive power supply solution for household and industrial applications.

Features:

Ultra width 52.5mm(3SU)
Universal input 85-264VAC
No minimun load required
DC output adjust(±10%)
Cooling by free air convection -30~+70℃
DIN rail TS-35/7.5 or 15
Protections:Short circuit/Overload/Over voltage
LED indicator for power on
2 years warranty

Applications:

Household control system
Building automation
Industrial control system
Factory automation
Electro-mechanical apparatus

Specifications:

Model		HDR-60-12	HDR-60-24	HDR-60-48
Output	DC Voltage	12V	24V	48V
	Current Range	0-5A	0-2.5A	0-1.25A
	Rated Power	60W	60W	60W
	Ripple Noise(Max)	120mVp-p	150mVp-p	240mVp-p
	Voltage Adj.Range	10.8~13.8V	21.6~29V	43.2~55.2V
	Voltage Tolerance	±1.0%	±1.0%	±1.0%
	Line Regulation	±1.0%	±1.0%	±1.0%
	Load Regulation	±1.0%	±1.0%	±1.0%
	Set up,Rise time	500ms,50ms/230VAC 500ms,50ms/115VAC(full load)
	Hold up Time	30ms/230VAC 12ms/115VAC(full load)
Input	Voltage Range	85 ~264VAC 120~370VDC
	Frequency	47 ~ 63Hz
	Efficiency	88%	90%	91%
	AC Current	1.2A/115VAC 0.8A/230VAC
	Inrush Curent	30A/115VAC 60A/230VAC
	Leakage Current	<1mA / 240VAC
Protection	Overload	105~160% rated output power
		Hiccup mode when output voltage<50%, recovers automatically after fault condition is removed Constant current limiting within 50%~100% rated output voltage,recovers automatically after fault condition is removed
	Over Voltage	14.2~16.2V	30~36V	56.5~64.8V
		Protection type : Shut down o/p voltage, re-power on to recover
Environment	Working Temperature	-30~ +70℃ (Refer to derating curve as datasheet from SMUN)
	Working Humidity	20 ~ 95% RH non-condensing
	Storage Temp.Humidity	-40 ~ +85℃, 10 ~ 95% RH
	Temp.Coefficient	±0.03%/℃ (0 ~ 50℃)
	Vibration	Component：10~500Hz,2G 10min./1 cycle，60min. each along X,Y,Z axes; Mounting: Compliance IEC60068-2-6
Safety	Safety Standards	Comply with CE and GB4943.1 safety standards
	Withstand Voltage	I/P-O/P:3KVAC
	Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC/25℃/70% RH
	EMC Emission	EN55032(CISPR32)CLassB,EN61000-3-3
	EMC Immunity	EN 61000-4-2,3,4,5,6,8
Others	MTBF	>907k hrs MIL-HDBK-217F(25℃)
	Dimension	52.59054.5mm (LWH)
	Packing	190g
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Installation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power. 6. Derating may be needed under low input voltage. Please check the derating curve for more details. In case the adjacent device is a heat sour, 15mm clearance is recommended 7.Please contact with SMUN customer service for more details.

Data Sheet

{"json":"[]","type":"1"}