Products

Home » Products » Switching Power Supply » Din Rail Power Supply » SDR-240 240W Thin Din Rail Power Supply

Product Category

Share to:

SDR-240 240W Thin Din Rail Power Supply

Availability:

Quantity:



Inquire Add to Basket

Model:
SDR-240
Brand:
SMUN

Description:

The SDR-240 series is a DIN rail-mounted switch power supply,is widely used in industrial control, automation equipment, instrumentation, communication devices, and LED lighting applications, among others. Here is an overview of its key features and specifications:

Features:

Wide Range Input Voltage: The SDR-240 series is designed with a wide input voltage range, typically covering 85-264VAC or 100-370VDC, enabling it to operate stably across various global electrical standards, thereby enhancing its versatility and flexibility.
High Efficiency: As an energy-efficient power supply, the SDR-240 typically achieves conversion efficiency above 80%, with some models even higher. This not only reduces energy consumption but also lowers operating costs and environmental impact.
Low No-Load Power Consumption: In compliance with standards like ErP Lot 6, these power supplies have minimal power draw when unloaded or lightly loaded, aligning with green energy-saving requirements.
Comprehensive Protection Mechanisms: Beyond basic protections such as Short Circuit Protection (SCP), Overvoltage Protection (OVP), and Overload Protection (OLP), the SDR-240 may also feature Over-Temperature Protection (OTP), ensuring automatic output cutoff under abnormal conditions to prevent damage.
International Certifications: These products typically pass multiple international safety certifications, including CE, TÜV, among others, assuring product quality and safety for global market applications.
Adjustable Output Voltage: Some models might offer output voltage fine-tuning, allowing users to adjust the voltage output according to specific needs, increasing flexibility.

Applications:

Industrial Automation: Provides stable DC power for PLC controls, sensors, actuators, and other industrial automation equipment.
Security & Surveillance: Powers CCTV cameras, access control systems, alarm systems, and other security devices, ensuring 24/7 uninterrupted operation.
LED Lighting: Suitable for indoor and outdoor LED lighting systems, particularly for LED strips and fixtures requiring constant voltage drive.
Telecommunication Equipment: Supplies power to routers, switches, wireless access points, and other telecommunications infrastructure, ensuring data transmission stability.
Instrumentation & Control Systems: Used in various measuring instruments, automation control systems, providing power for controllers, displays, etc.
Medical Devices: While not all SDR-240 models are suitable for medical devices, certain certified models can be used for auxiliary power in medical instruments such as monitoring devices and small-scale therapy equipment.

Specifications:

Model		SDR-240-12	SDR-240-24	SDR-240-48
Output	DC Voltage	12V	24V	48V
	Current Range	0-20A	0-10A	0-5A
	Rated Power	240W	240W	240W
	Ripple Noise(Max)	100mVp-p	120mVp-p	150mVp-p
	Voltage Adj.Range	12-14V	24-28V	48-55V
	Voltage Tolerance	±1.0%	±1.0%	±1.0%
	Line Regulation	±0.5%	±0.5%	±0.5%
	Load Regulation	±1.0%	±1.0%	±1.0%
	Set up,Rise time	1500ms,60ms/230VAC 3000ms,60ms/115VAC(full load)
	Hold up Time	20ms/230VAC 20ms/115VAC(full load)
Input	Voltage Range	88 ~264VAC 124~370VDC[DC input operation possible by connecting AC/L(+),AC/N(-)]
	Frequency	47 ~ 63Hz
	Efficiency	85%	88%	90%
	AC Current	1.4A/115VAC 0.85A/230VAC
	Inrush Curent	30A/115VAC 50A/230VAC
	Leakage Current	<1mA / 240VAC
Protection	Overload	Normally works within 110~150% rated output power for more than 3 seconds and then shut down o/p voltage,re-power on to recover
		150~170%rated power,constant current limiting with auto-recovery within 3 seconds,and then shut down o/p voltage after 3 seconds,re-power on to recover
	Over Voltage	14-17V	29-33V	56-65V
		Protection type : Shut down o/p voltahe, re-power on to recover
	Over Temperature	Shut down o/p voltage,re-power on to receover after temperature goes down
Environment	Working Temperature	-30~ +70℃ (Refer to derating curve as datasheet from SMUN)
	Working Humidity	20 ~ 95% RH non-condensing
	Storage Temp.Humidity	-40 ~ +85℃, 10 ~ 95% RH
	Temp.Coefficient	±0.03%/℃ (0 ~ 50℃)
	Vibration	Component：10~500Hz,2G 10min./1 cycle，60min. each along X,Y,Z axes; Mounting: Compliance IEC60068-2-6
Safety	Safety Standards	Ul508, TUV BS EN/EN62368-1, EAC TP TC 004, BSMI CNS14336-1 approved;（meet BS EN/EN60204-1)
	Withstand Voltage	I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC/25℃/70% RH
	EMC Emission	Compliance to BS EN/EN55032(CISPR32), BS EN/EN61000-3-2,EAC TP TC 020, CNS13438 Class A
	EMC Immunity	Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11,BS EN/EN55024, BS EN/EN61000-6-2(BS EN/EN50082-2), heavy industry level, criteria A，EAC TP TC 020
Others	MTBF	292.1k hrs MIL-HDBK-217F(25℃)
	Dimension	63125.2113.5mm (LWH)
	Packing	1.03Kg; 12pcs/13.4Kg/1.22CUFT
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line ragulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Installation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power.In case the adjacent device is a heat soure, 15mm clearance is recommended 6. Derating may be needed under low input voltage. Please check the derating curve for more details. 7.Please contact with SMUN customer service for more details.