HDR-15 15W Din Rail Power Supply

Description:

HDR-15 is one economical ultra slim 15W DIN rail power supply series,adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails.The body is designed 17.5mm(1SU)in width,which allows space saving inside the cabinets.The entire series adopts the full range AC input from 85VAC to 264VAC(277VAC operational) and conformts to BS EN/EN61000-3-2,the norm the European Union regulates for harmonic current.

HDR-15 is designed with plastic housing that it can effectively prevent user from electric hazards.With working efficiency up to 87%,the entire series can operate at the ambient temperature between -30℃ and 70℃ under air convection.The complete protection functions and relevant certificates for home automations and industrial control apparatus(IEC 62368-1,UL508,UL62368-1,BS EN/EN61558-2-16)make HDR-15 a very competitive power supply solution for household and industrial applications.

Features:

• Ultra width 17.5mm(1SU)

• Universal input 85-264VAC

• No minimun load required

• DC output adjust(±10%)

• Cooling by free air convection -30~+70℃

• DIN rail TS-35/7.5 or 15

• Protections:Short circuit/Overload/Over voltage

• LED indicator

• 2 years warranty

Applications:

• Household control system

• Building automation

• Industrial control system

• Factory automation

• Electro-mechanical apparatus
  

Specifications:

Model		HDR-15-5	HDR-15-12
Output	DC Voltage	5V	12V	24V
	Current Range	0-3A	0-1.25A	0-0.63A
	Rated Power	15W	15W	15W
	Ripple Noise(Max)	80mVp-p	100mVp-p	120mVp-p
	Voltage Adj.Range	4.5~5.5V	10.8~13.5V	21.6~28V
	Voltage Tolerance	±2.0%	±1.0%	±1.0%
	Line Regulation	±1.0%	±1.0%	±1.0%
	Load Regulation	±1.0%	±1.0%	±1.0%
	Set up,Rise time	2000ms,80ms/230VAC   2000ms,80ms/115VAC(full load)
	Hold up Time	30ms/230VAC    12ms/115VAC(full load)
Input	Voltage Range	85 ~264VAC    120~370VDC
	Frequency	47 ~ 63Hz
	Efficiency	80%	85%	86%
	AC Current	0.55A/115VAC    0.25A/230VAC
	Inrush Curent	25A/115VAC 45A/230VAC
	Leakage Current	<1mA / 240VAC
Protection	Overload	110~150% rated output power
		Protection type:Constant current limiting, recovers automatically after fault condition is removed
	Over Voltage	5.75~7V	13.8~16.2V	30~36V
		Protection type : Shut down o/p voltage, re-power on to recover
Environment	Working Temperature	-30~ +70℃ (Refer to derating curve as datasheet from SMUN)
	Working Humidity	20 ~ 95% RH non-condensing
	Storage Temp.Humidity	-40 ~ +85℃, 10 ~ 95% RH
	Temp.Coefficient	±0.03%/℃ (0 ~ 50℃)
	Vibration	Component：10~500Hz,2G 10min./1 cycle，60min. each along X,Y,Z axes; Mounting: Compliance IEC60068-2-6
Safety	Safety Standards	Comply with CE and GB4943.1 safety standards
	Withstand Voltage	I/P-O/P:3KVAC
	Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC/25℃/70% RH
	EMC Emission	EN55032(CISPR32)CLassB,EN61000-3-3
	EMC Immunity	EN 61000-4-2,3,4,5,6,8
Others	MTBF	>907k hrs MIL-HDBK-217F(25℃)
	Dimension	17.5*90*54.4mm (L*W*H)
	Packing	0.068Kg
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.  2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.  3. Tolerance : includes set up tolerance, line regulation and load regulation.  4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.  5. Installation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power.  6. Derating may be needed under low input voltage. Please check the derating curve for more details. In case the adjacent device is a heat sour, 15mm clearance is recommended 7.Please contact with SMUN customer service for more details.

{"json":"[{\"photoId\":\"348701644\",\"photoType\":\"pdf\",\"photoSize\":\"625\",\"name\":\"HDR-15 Specs.pdf\",\"fileId\":\"6556474\",\"encodeFileId\":\"ngpUKlakvEct\",\"photoUrlNormal\":\"//rjrorwxhikmrlm5p-static.micyjz.com/static/assets/widget/images/downloadNew/pdf.svg\"}]","type":"1"}