MDR-60 60W Thin Din Rail Power Supply

Description:

MDR-60 is a meticulously designed DIN rail-mounted switch mode power supply primarily aimed at industrial and commercial applications, providing users with an efficient and reliable DC power solution.

Features:

• Rated Power: MDR-60 offers an output power of 60 watts, catering to the power demands of higher wattage equipment.

• Input Voltage Range: Universally supports a wide range of AC input voltages, typically from 85VAC to 264VAC, ensuring stable operation across varied voltage environments globally.

• Flexible Output Configurations: Depending on the model, the MDR-60 series can deliver multiple standard DC output voltages such as 5V, 12V, 24V, 48V, and more, tailored to different application requirements. For instance, the MDR-60-24 supplies 24V DC, with the current automatically adjusted based on the power output.

• Efficiency and Energy Savings: This series commonly boasts high conversion efficiency, often exceeding 90%, effectively reducing operating costs and heat generation. Some models may incorporate Active Power Factor Correction (PFC) for enhanced grid efficiency.

• Protection Features: Equipped with comprehensive safety protections, including Overvoltage Protection (OVP), Overcurrent Protection (OCP), Short Circuit Protection (SCP), and Over-Temperature Protection (OTP), safeguarding both the power supply and connected devices against damage.

• Installation Method: Utilizes standard DIN rail mounting (e.g., TS35/7.5 or TS35/15 profiles), facilitating easy integration into existing control cabinets or distribution boards.

• Mechanical Design: Features a compact and ultra-slim design, ideal for installation in space-constrained environments. The casing is made from flame-retardant, high-temperature-resistant engineering plastics, ensuring safety and reliability over extended use.

• Electromagnetic Compatibility (EMC): Compliant with international EMC standards, ensuring stable operation in various complex electromagnetic environments and minimizing interference to other equipment.

Applications:

• Industrial Automation: Powers PLCs, servo drives, sensors, and other industrial control devices.

• LED Lighting: Serves as a dependable power source for LED strips, panel lights, and other lighting systems.

• Security Surveillance: Meets the power needs of CCTV cameras, access control systems, and other security equipment.

• Telecommunications & Networking: Provides stable power for network switches, routers, wireless access points, and more.

• Instrumentation & Control: Supplies DC power to various measuring instruments and control systems.

Specifications:

Model		MDR-60-12	MDR-60-24	MDR-60-48
Output	DC Voltage	12V	24V	48V
	Current Range	0-5A	0-2.5A	0-1.25A
	Rated Power	60W	60W	60W
	Ripple Noise(Max)	120mVp-p	150mVp-p	180mVp-p
	Voltage Adj.Range	10.8~13.2V	21.6~26.4V	43.2~52.8V
	Voltage Tolerance	±1.0%	±1.0%	±1.0%
	Line Regulation	±1.0%	±1.0%	±0.2%
	Load Regulation	±1.0%	±1.0%	±0.5%
	Set up,Rise time	500ms,30ms/230VAC   1000ms,30ms/115VAC(full load)
	Hold up Time	50ms/230VAC     20ms/115VAC(full load)
Input	Voltage Range	85 ~264VAC    124~370VDC
	Frequency	47 ~ 63Hz
	Efficiency	76%	80%	84%
	AC Current	0.55A/115VAC    0.35A/230VAC
	Inrush Curent	20A/115VAC 40A/230VAC
	Leakage Current	<1mA / 240VAC
Protection	Overload	105~160% rated output power
		Protection type:hiccup mode,recovers automatically after faul condition is removed.
	Over Voltage	13.8~16.2V	28.5~33.8V	41.4~48.6V
		Protection type : Shut down o/p voltahe, recovers automatically after fault condition is removed
Function	DC OK Active Signal(Max.)	9~13.5V/40mA	18~27V/20mA	41~54V/10mA
Environment	Working Temperature	-20~ +70℃ (Refer to derating curve as datasheet from SMUN)
	Working Humidity	20 ~ 90% RH non-condensing
	Storage Temp.Humidity	-20 ~ +85℃, 10 ~ 90% RH
	Temp.Coefficient	±0.03%/℃ (0 ~ 50℃)
	Vibration	Component：10~500Hz,2G 10min./1 cycle，60min. each along X,Y,Z axes; Mounting: Compliance IEC60068-2-6
Safety	Safety Standards	Comply with CE and GB4943.1 safety standards
	Withstand Voltage	I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC/25℃/70% RH
	EMC Emission	EN61000-3-2:2014/EN61000-3-3:2013
	EMC Immunity	EN55032:2015/EN55035:2017/60950-1
Others	MTBF	>299.2k hrs MIL-HDBK-217F(25℃)
	Dimension	40*90*100mm (L*W*H)
	Packing	0.25Kg
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.  2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.  3. Tolerance : includes set up tolerance, line regulation and load regulation.  4. The output needs to be reduced under the condition of low input voltage, refer to the derating curve chart for details.  5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may increase of the set up time. 6.Please contact with SMUN customer service for more details.

{"json":"[{\"photoId\":\"348569734\",\"photoType\":\"pdf\",\"photoSize\":\"286\",\"name\":\"SMUN-MDR-60 - 英文版.pdf\",\"fileId\":\"6553544\",\"encodeFileId\":\"hUfKAvFaiPZE\",\"photoUrlNormal\":\"//rjrorwxhikmrlm5p-static.micyjz.com/static/assets/widget/images/downloadNew/pdf.svg\"}]","type":"1"}