Products

Home » Products » Switching Power Supply » Din Rail Power Supply » HDR-100 100W Din Rail Power Supply

Product Category

loading

Share to:
sharethis sharing button

HDR-100 100W Din Rail Power Supply

Availability:
Quantity:
  • HDR-100

  • SMUN

Description:


HDR-100 is one economical ultra slim 100W DIN rail power supply series,adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails.The body is designed 70mm(4SU)in width,which allows space saving inside the cabinets.The entire series adopts the full range AC input from 85VAC to 264VAC(277VAC operational) and conformts to BS EN/EN61000-3-2,the norm the European Union regulates for harmonic current.

HDR-100 is designed with plastic housing that it can effectively prevent user from electric hazards.With working efficiency up to 90%,the entire series can operate at the ambient temperature between -30℃ and 70℃ under air convection.The complete protection functions and relevant certificates for home automations and industrial control apparatus(IEC 62368-1,UL508,UL62368-1,BS EN/EN61558-2-16)make HDR-100 a very competitive power supply solution for household and industrial applications.

Features:

  • Ultra width 70mm(4SU)

  • Universal input 85-264VAC

  • No minimun load required

  • DC output adjust(±10%)

  • Cooling by free air convection -30~+70℃

  • DIN rail TS-35/7.5 or 15

  • Protections:Short circuit/Overload/Over voltage

  • LED indicator for power on

  • 2 years warranty


Applications:

  • Household control system

  • Building automation

  • Industrial control system

  • Factory automation

  • Electro-mechanical apparatus



Specifications:

Model HDR-100-12 HDR-100-24 HDR-100-48
Output DC Voltage 12V 24V 48V
Current Range 0-7.5A 0-4.2A 0-2.1A
Rated Power 90W 100.8W 100.8W
Ripple Noise(Max) 120mVp-p 150mVp-p 240mVp-p
Voltage Adj.Range 10.8~13.8V 21.6~29V 43.2~55.2V
Voltage Tolerance ±2.0% ±1.0% ±1.0%
Line Regulation ±1.0% ±1.0% ±1.0%
Load Regulation ±1.0% ±1.0% ±1.0%
Set up,Rise time 500ms,60ms/230VAC   500ms,60ms/115VAC(full load)
Hold up Time 30ms/230VAC    12ms/115VAC(full load)
Input Voltage Range 85 ~264VAC    120~370VDC
Frequency 47 ~ 63Hz
Efficiency 88% 90% 90%
AC Current 3A/115VAC    1.6A/230VAC
Inrush Curent 35A/115VAC  70A/230VAC
Leakage Current <1mA / 240VAC
Protection Overload 105~150% rated output power

Hiccup mode when output voltage<50%, recovers automatically after fault condition is removed

Constant current limiting within 50%~100% rated output voltage,recovers automatically after fault condition is removed

Over Voltage 14.2~16.2V 30~36V 56.5~64.8V
Protection type : Shut down o/p voltage, re-power on to recover
Environment Working Temperature -30~ +70℃ (Refer to derating curve as datasheet from SMUN)
Working Humidity 20 ~ 95% RH non-condensing
Storage Temp.Humidity -40 ~ +85℃, 10 ~ 95% RH
Temp.Coefficient ±0.03%/℃ (0 ~ 50℃)
Vibration Component:10~500Hz,2G 10min./1 cycle,60min. each along X,Y,Z axes; Mounting: Compliance IEC60068-2-6
Safety
Safety Standards Comply with CE and GB4943.1 safety standards
Withstand Voltage I/P-O/P:3KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC/25℃/70% RH
EMC Emission EN55032(CISPR32)CLassB,EN61000-3-3
EMC Immunity EN 61000-4-2,3,4,5,6,8
Others MTBF >856.5k hrs MIL-HDBK-217F(25℃)
Dimension 52.5*90*54.5mm (L*W*H)
Packing 270g
Note

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 

3. Tolerance : includes set up tolerance, line regulation and load regulation. 

4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 

5. Installation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power. 

6. Derating may be needed under low input voltage. Please check the derating curve for more details. In case the adjacent device is a heat sour, 15mm clearance is recommended

7.Please contact with SMUN customer service for more details.



Previous: 
Next: 

Contact Us

 No. 5, Zhengshun West Road, Xiangyang Industrial Zone, Liushi,Yueqing,Zhejiang,China,325604
+86-13868370609 
+86-0577-62657774 

Quick Links

Quick Links

Copyright © 2024 Zhejiang Ximeng Electronic Technology Co., Ltd. Support by  Leadong   Sitemap
Contact us