Products

Home » Products » Switching Power Supply » Din Rail Power Supply » HDR-15 15W Din Rail Power Supply

Product Category

loading

Share to:
sharethis sharing button

HDR-15 15W Din Rail Power Supply

Availability:
Quantity:
Inquire Add to Basket

  • HDR-15

  • SMUN

Description:


HDR-15 is one economical ultra slim 15W DIN rail power supply series,adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails.The body is designed 17.5mm(1SU)in width,which allows space saving inside the cabinets.The entire series adopts the full range AC input from 85VAC to 264VAC(277VAC operational) and conformts to BS EN/EN61000-3-2,the norm the European Union regulates for harmonic current.

HDR-15 is designed with plastic housing that it can effectively prevent user from electric hazards.With working efficiency up to 87%,the entire series can operate at the ambient temperature between -30℃ and 70℃ under air convection.The complete protection functions and relevant certificates for home automations and industrial control apparatus(IEC 62368-1,UL508,UL62368-1,BS EN/EN61558-2-16)make HDR-15 a very competitive power supply solution for household and industrial applications.

Features:

  • Ultra width 17.5mm(1SU)

  • Universal input 85-264VAC

  • No minimun load required

  • DC output adjust(±10%)

  • Cooling by free air convection -30~+70℃

  • DIN rail TS-35/7.5 or 15

  • Protections:Short circuit/Overload/Over voltage

  • LED indicator

  • 2 years warranty


Applications:

  • Household control system

  • Building automation

  • Industrial control system

  • Factory automation

  • Electro-mechanical apparatus



Specifications:

Model HDR-15-5 HDR-15-12 HDR-15-24
Output DC Voltage 5V 12V 24V
Current Range 0-3A 0-1.25A 0-0.63A
Rated Power 15W 15W 15W
Ripple Noise(Max) 80mVp-p 100mVp-p 120mVp-p
Voltage Adj.Range 4.5~5.5V 10.8~13.5V 21.6~28V
Voltage Tolerance ±2.0% ±1.0% ±1.0%
Line Regulation ±1.0% ±1.0% ±1.0%
Load Regulation ±1.0% ±1.0% ±1.0%
Set up,Rise time 2000ms,80ms/230VAC   2000ms,80ms/115VAC(full load)
Hold up Time 30ms/230VAC    12ms/115VAC(full load)
Input Voltage Range 85 ~264VAC    120~370VDC
Frequency 47 ~ 63Hz
Efficiency 80% 85% 86%
AC Current 0.55A/115VAC    0.25A/230VAC
Inrush Curent 25A/115VAC 45A/230VAC
Leakage Current <1mA / 240VAC
Protection Overload 110~150% rated output power
Protection type:Constant current limiting, recovers automatically after fault condition is removed
Over Voltage 5.75~7V 13.8~16.2V 30~36V
Protection type : Shut down o/p voltage, re-power on to recover
Environment Working Temperature -30~ +70℃ (Refer to derating curve as datasheet from SMUN)
Working Humidity 20 ~ 95% RH non-condensing
Storage Temp.Humidity -40 ~ +85℃, 10 ~ 95% RH
Temp.Coefficient ±0.03%/℃ (0 ~ 50℃)
Vibration Component：10~500Hz,2G 10min./1 cycle，60min. each along X,Y,Z axes; Mounting: Compliance IEC60068-2-6
Safety
 Safety Standards Comply with CE and GB4943.1 safety standards
Withstand Voltage I/P-O/P:3KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC/25℃/70% RH
EMC Emission EN55032(CISPR32)CLassB,EN61000-3-3
EMC Immunity EN 61000-4-2,3,4,5,6,8
Others MTBF >907k hrs MIL-HDBK-217F(25℃)
Dimension 17.5*90*54.4mm (L*W*H)
Packing 0.068Kg
Note

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 

3. Tolerance : includes set up tolerance, line regulation and load regulation. 

4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 

5. Installation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power. 

6. Derating may be needed under low input voltage. Please check the derating curve for more details. In case the adjacent device is a heat sour, 15mm clearance is recommended

7.Please contact with SMUN customer service for more details.



download HDR-15 Specs.pdf

Previous: 
Next: 
din rail power supply Din rail mount power supply

Contact Us

 No. 5, Zhengshun West Road, Xiangyang Industrial Zone, Liushi,Yueqing,Zhejiang,China,325604
+86-13868370609 
+86-0577-62657774 

Quick Links

Quick Links

Copyright © 2024 Zhejiang Ximeng Electronic Technology Co., Ltd. Support by  Leadong   Sitemap
Contact us