Products

Home » Products » Switching Power Supply » Single Output Power Supply » S-145 145W Portable Switching Power Supply For Security Cameras

Product Category

loading

Share to:
sharethis sharing button

S-145 145W Portable Switching Power Supply For Security Cameras

Output Voltage:
Availability:
Quantity:
  • S-145

  • SMUN

  • 8504401400

Features:

  1. AC input range selectable by switch  

  2. Built-in EMI filter,tiny ripple

  3. Protections:Short circuit/overload/over voltage

  4. Cooling by free air convection

  5. 100% full load burn-in test

  6. 2 years warranty


Specifications:

Model S-145-5 S-145-12 S-145-15 S-145-24 S-145-48
Output DC voltage 5V 12V 15V 24V 48V
Rated current 25A 12.1A 9.7A 6.1A 3A
Current range 0-25A 0-12.1A 0-9.7A 0-6.1A 0-3A
Rated power 125W 145.2W 145.5W 146.4W 144W
Ripple&noise 80mVp-p 100mVp-p 100mVp-p 120mVp-p 120mVp-p
Voltage adj.range 4.5-5.5V 10.8-13.2V 13.5-16.5V 21.6-26.4V 43.2-52.8V
Voltage tolerance ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
Line regulation ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
Load regulation ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
Set up,rise time 200ms,100ms
Hold up time(Typ.) 30ms/230VAC
Input Voltage range 85~132VAC/170~264VAC by switch  240~370VDC
Frequency 47 ~ 63Hz
Efficiency 78% 82% 84% 84% 84%
AC current 1.9A/115V   1.2A/230V
Inrush current Cold start: 18A/115V    36A/230V
Leakage current <2.5mA/240VAC
Protection Overload Rated output power 115%~135% start overload protection
Protection type:hiccup mode,auto-recovery after fault condition is removed
Over voltage 5.75-6.75V 13.8V-16.2V 17.25-2.025V 28.4-32.4V 55.2-64.8V
Protection type:Shut off o/p voltage,clamping by zener diode
Environment Working temperature -10℃~+60℃
Working humidity 20-90%RH
Storage temp,humidity -20~+85℃,20%-90%RH
Temp.coefficient ±0.03%℃(0-50℃)
Vibration 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
Safety
&
EMC
Safety standards Compliance to:CE and GB4943.1 EN 60950.1 safety standards
Withstand voltage I/P-O/P:1.5KVAC I/P-FG:1.5KVAC  O/P-PG:0.5KVAC
Isolation resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC emission EN61000-3-2:2014/EN61000-3-3:2013
EMC immunity EN 55032:2015/EN55035:2017/60950-1
Others MTBF ≥720.6K hrs MIL-HDBK-217F(25℃)
Size L199*W98*H38mm
Packing 0.55KG
Note 1. All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25℃ of ambient temperature.
2. Ripple&noise are measured at 20MHz of bandwidth by using a 12 "twisted pair -wire terminated with a 0.1uf and 47uf parallel capacitors.
3. Tolerance:includes set up tolerance,line regulation and load regulation.
4. Derating output is required under low input voltage. Please refer to the derating curve for details.
5. The power supply should be considered as a part of the components in the system. All EMC tests will test the test samples on a metal iron plate with a thickness of 1mm, a length of 360mm * width of 360mm.

02030405

Previous: 
Next: 

Contact Us

 No. 5, Zhengshun West Road, Xiangyang Industrial Zone, Liushi,Yueqing,Zhejiang,China,325604
+86-13868370609 
+86-0577-62657774 

Quick Links

Quick Links

Copyright © 2024 Zhejiang Ximeng Electronic Technology Co., Ltd. Support by  Leadong   Sitemap
Contact us